Demos and Instructional Videos

Scroll down to find the product you're interested in.  Reach out to us directly for additional help if needed.

BottlePro Max Adapter

3rd Generation (Released in Late 2022)
BottlePro Max (3rd generation) is our new cup holder adapter that is more versatile and fits better with more bottles and cup holders.

It now includes a twist-to-expand base and flexible centralizing tabs, allowing it to fit with more cup holders and bottles than our previous BottlePro version.

​BottlePro Max fits most bottles between 2.5" and 4.25" diameter, including most Hydro Flasks, Nalgenes, YETIs, and other similar bottles.

Compatible with most bottles ranging from 12 to 48 ounces, including Hydro Flasks, YETIs, Iron Flasks, Takeyas, Simple Modern, Nalgenes, Fifty Fifty, Thermoflasks, Klean Kanteens.

BottlePro Adapter

2nd Generation (2017 - 2022)
(We highly recommend watching the video)
  1. Remove the foam Soft-Fit Sleeve from the base.
  2. Your BottlePro comes with two (2) adapter rings.  They should arrive in the "locked" position.
  3. To unlock, turn the base to the left until you hear a "click" (it's not far).  The larger adapter ring should slide straight off.  Repeat for the smaller ring.
  4. Try fitting your BottlePro in your cup holder.  If it's loose, add the small adapter ring.  Notice the two small bumps on the inside of the ring.  Line up the bumps so they slide into the vertical grooves on the BottlePro base.  Slide the adapter ring on in the direction indicated by the arrow.
  5. Turn the adapter ring to the right until you hear a "click" (it's not far).  This indicates that the ring is be locked into place.
  6. Fine-tune your fit by (a) adding the Soft-Fit Sleeve around the base, (b) adding the larger adapter ring if needed, and (c) extending the base by locking the adapter ring in at different heights by locking it into one of the other sets of locking notches.

SplashPro Splash Guard

Compatible with Wide Mouth Hydro Flask Bottles
  1. Wash the silicone splash guard in warm, soapy water.
  2. Add water to your bottle.  Also ice on hot days.
  3. Insert your SplashPro in the top of your wide mouth Hydro Flask.
  4. Screw on your Flex Cap lid tightly.  It should push your SplashPro down a tiny distance, but not too far.
  5. Try to keep your lid as centered as possible when you start screwing it on.  If the cap rubs too hard against the SplashPro, then it can push the splash guard farther down then neck of the bottle.​

FlavorFuze Fruit Infuser

With Splash Guard Lid for Wide Mouth Hydro Flasks
  1. Remove the silicone cap.  Wash the silicone cap and plastic infuser tube in warm, soapy water.
  2. Add your fruits and other flavorings.
  3. Reattach the silicone cap.
  4. Carefully insert the FlavorFuze into your Hydro Flask wide mouth bottle.  Only push it halfway down the neck of your bottle.
  5. This works best with Flex Cap lids.  The lid will push your FlavorFuze down a little more, but it should stay fixed in the neck of your bottle for easy retrieval.
  6. Hydro Flask's Flex Sip lid may push the FlavorFuze down too far, and Straw Lids are not compatible (see our FlavorFuze Straw attachment for Straw lids).

FlavorFuze Straw Fruit Infuser

Compatible with Hydro Flask Straw Lids (Including the New Flex Straw Lid)
  1. Wash FlavorFuze Straw infuser tube in warm, soapy water.
  2. Add your fruits and other flavorings.
  3. Slide the straw through the hole at the top. 
  4. Slide it on all the way until the infuser rests against the bottom of your straw lid.
  5. The straw should align with a channel on the outside of the infuser.  Snap the straw into the clip at the bottom of the FlavorFuze Straw.

FlavorFuze Steel and Steel Mini

Tea and Coffee Infusers for Wide Mouth Hydro Flasks (Or Plastic-Free Fruit Infusing)
MAKING TEA
  1. We recommend using FlavorFuze Steel Mini with a 12/16/20 ounce Hydro Flask Coffee bottle (16oz shown in this video).
  2. Wash your FlavorFuze Steel Mini in warm, soapy water.
  3. Rest your FlavorFuze Steel Mini on the rim of your bottle.
  4. Add your favorite loose leaf tea.
  5. Slow-pour hot water into your bottle until the tea leaves are floating.
  6. Stir your tea leaves a little, like with a knife or spoon.
  7. Let it steep for 3-5 minutes.
  8. Remove the FlavorFuze Steel Mini in the sink (it'll drip!).
  9. Add your Flex Sip or other lid to your Hydro Flask and enjoy!
MAKING COLD BREW COFFEE
  1. We recommend using FlavorFuze Steel with a 32/40 ounce wide mouth bottle (40oz shown in this video) to brew the coffee concentrate and a 12/16/20 ounce Hydro Flask Coffee bottle (16oz shown in this video) to enjoy your drink.
  2. Wash your FlavorFuze Steel in warm, soapy water.
  3. Rest your FlavorFuze Steel on the rim of your large bottle.
  4. Add your favorite coarse-grind coffee grounds with a 1:3 or 1:4 coffee-to-water ratio.  Slowly add water.  We recommend stirring the grounds while adding water.
  5. Optional: Rotate your bottle a few times during brewing.
  6. Put your Hydro Flask in the refrigerator for 10-14 hours.
  7. Pull out your FlavorFuze Steel over the sink (it'll drip!).  Dispose of or compost the coffee grounds and wash your FlavorFuze Steel.
  8. Slowly pour the concentrate into another container.  Don't pour the last little bit because it may have more sediment (depending on your coffee grind).
  9. Slowly pour the concentrate from the other container back into your large Hydro Flask again for storage.  Dispose of the last little bit of concentrate if it has too much sediment.
  10. Optional: you can run the concentrate through a tighter filter, like a filter bag, to remove more sediment if desired.
  11. Now for the tasty part!  Make a drink!  An easy drink with a 16oz Hydro Flask is to add a few ice cubes, 4oz cold brew concentrate, and top it off with fresh water.
  12. Add your Flex Sip or other lid to your Hydro Flask and enjoy!

HikerPouch Leather Bottle Sling

Compatible with 32/40oz Hydro Flasks, 32/48oz Nalgenes, and Many Other Wide Mouth Bottles
  1. Adjust the strap length to your desired fit.
  2. Add your bottle and phone.  You can also clip your keychain carabiner onto the one of the d-rings.
  3. Enjoy your hike!
  4. We recommend treating your HikerPouch with leather conditioner 1-2 times per year depending on use.  This will keep the leather in good shape and looking great for many more years.  Starting June, 2022, we will start including a leather conditioner sample with each HikerPouch to help get you started.
PS Kreative, LLC, Licensed in North Carolina, USA (ID # 2514262), DBA "BottlePro"